ALU ZINC BRUSH 70-41

Alu Zinc Brush contains micro fine particles of zinc aluminium metal, plus synthetic bonding resins to produce a continuous Cathodic protection. For repairing damaged or newly galvanised and bright galvanised surfaces; Manufactured from 99% Pure Zinc conforming to BSEN ISO 3549.    

Alu Zinc Brush is an excellent colour match to new bright galvanising and can be used to touch up imperfections in newly galvanised pieces.  

Application:

Ideal for repairing weld, drilling, cutting marks on newly bright galvanised metal surfaces. Alu Zinc Brush contains micro fine particles of zinc metal in special synthetic bonded resins, producing a continuous zinc barrier protection. For repairing damaged newly galvanised surfaces.
Surfaces must be clean from rust, oil, grease and thoroughly dry.
Stir well before use applying an even brush film., further coats can be
applied, allow to dry for 60 minutes.
Widely used within the metal fabrication industry where a waterproof bright shiny metallic finish is required. 

Benefits:

Good adhesion to all surfaces
Alu Zinc Brush is dry in approximately 60 minutes and waterproof within 15 minutes dependant upon humidity and temperature
Excellent adhesion on metals, glass, ceramics, wood and plastics
Resistant to salt and water. Protects against various acids, lye solutions and gases
Excellent electrical conductivity and can be spot welded
Long term corrosion protection

Packaged in 1 litre